CO Line Attributes 2-69
Features and Operation
STARPLUS STSe - Programming & Operations Manual August 2005
Programming Steps
1. Press the CO LINE ATTRIBUTES flexible button (FLASH 80, Button #2). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
FLASH 40 1 Flash Timer Programming 10=1.0 sec
PAGE C 2 Ring Delay Timer 00=Disabled
3 Wink Timer 140 ms
4 Release Timer 020=200 ms
5 Reseize Timer 200=200 ms
6 Guard Timer 05=0.5 sec
7Seize Timer 010=0.1 sec
8 Preset Forward Timer 10 sec
9 DID Collect Timer 015=150 ms
10 T-1 Collect Timer 015=150 ms
INITIALIZE CO LINES
PRESS HOLD
Table 2-4: CO Line Attribute Defaults
Program
Code
Flexible
Button
Features
Default Value
(after initialization)
To Next Page
Loading...
