Wacker Neuson E3000 User Manual

wc_tx001803gb.fm
135
E 3000 Maintenance
8.2 Inspecting the HTF System and the Fuel System
Requirements  Machine shut down
 Burner cool
HTF System Hoses:
1. Rotate the hose reel brake T-handle counterclockwise to release the brake.
2. Unwind all the hose off the reel. Inspect the hose for leaks and/or damage.
3. Repair any leaks and repair/replace any damaged hoses. See topic Repairing a
Hose.
4. Turn on the machine and rewind the hose onto the reel.
5. Engage the brake by turning the T-handle clockwise.
Pump, motor, and hydronic heater:
1. Inspect the pumps and motor assemblies and associated plumbing for leaks
and/or damage.
2. Inspect hydronic heater and associated plumbing for leaks and/or damage.
3. Repair/replace any damaged components.
4. Repair any leaks.
Fuel System Burner:
1. Inspect all fuel hoses and connections for leaks and/or damage.
2. Inspect the fuel filter and associated fuel hoses for leaks and/or damage.
3. Repair/replace any damaged hoses, pipes, or connectors.
4. Repair any leaks.
Fuel tank:
1. Inspect all fuel hoses running into and out of the fuel tank for leaks and/or dam-
age.
2. Repair/replace any damaged hoses, pipes, or connectors.
3. Repair any leaks.

Wacker Neuson E3000 Specifications

General

Electrical Requirements	230 V, 50 Hz
Voltage	230 V
Operating Voltage	230 V
Heat Capacity	3000 W
Fuel Consumption	0.3 l/h
Tank Capacity	12 l
Fuel Tank Capacity	12 l
Heating Capacity	3000 W
Fuel Consumption (l/h)	0.3 l/h
Tank Capacity (l)	12 l
Power Consumption	3 kW