wc_tx001951gb.fm
49
E 3000 Operation
4.11 Checking the HTF Level
When
Before leaving for the job site, or
Before beginning operation at the job site
Prerequisites
The machine is level.
The machine is cool.
Procedure
The Heat Transfer Fluid (HTF) level must be between the marks on the
sightglass (c).
If low
If the HTF level is low, HTF must be added. Filling the HTF reservoir requires
electric power to the machine and knowledge of the machine’s operation.
Familiarize yourself with the function of the machine’s controls, then see topic
Filling the HTF Reservoir for detailed instructions.
To Next Page
Loading...
