EasyManuals Logo

Wacker Neuson E3000 User Manual

Wacker Neuson E3000
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #160 background imageLoading...
Page #160 background image
wc_tx002068gb.fm
160
Genset Maintenance Onan Genset
9.5 Replacing the Air Filter Element
Requirements
Engine stopped
New air filter element
Removing
Perform the procedure below to replace the air filter element.
1. Disconnect the battery.
2. Remove the front access cover (a).
3. Remove the wing nuts (b), bracket (c), filter housing (d), and the filter element
(e).
Installing
1. Perform the procedure below to install the air filter element.
2. Install the new air filter element using the filter housing, bracket, and wing nuts.
Tighten wing nuts hand tight.
3. Reinstall the front access cover.
4. Reconnect the battery.
Result
The air filter element has now been installed.
wc_gr008038
a
b
c
d
e

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson E3000 and is the answer not in the manual?

Wacker Neuson E3000 Specifications

General IconGeneral
Electrical Requirements230 V, 50 Hz
Voltage230 V
Operating Voltage230 V
Heat Capacity3000 W
Fuel Consumption0.3 l/h
Tank Capacity12 l
Fuel Tank Capacity12 l
Heating Capacity3000 W
Fuel Consumption (l/h)0.3 l/h
Tank Capacity (l)12 l
Power Consumption3 kW

Related product manuals