EasyManuals Logo
Home>Wacker Neuson>Heater>E3000

Wacker Neuson E3000 User Manual

Wacker Neuson E3000
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
ghi_tx001160gb.fm
35
E 3000 Lifting and Transporting
3.5 Towing the Machine
NOTICE: The towing vehicle must be equipped with a Class III or above hitch.
Procedure
Perform the procedure below when towing the machine.
1. Read and follow the towing safety guidelines. See topic Safety Guidelines for
Towing the Machine.
2. Complete the shut-down procedures. See topic Stopping and Packing Up the
Machine.
3. Adjust the amount of fuel in the machine to approximately 70% capacity to avoid
fuel spillage.
4. Complete the Before Towing Checklist. See topic Before Towing Checklist.
5. Connect the machine to the towing vehicle.
6. Rotate the trailer jack to a horizontal position.
7. Tow the machine as needed.
WARNING
Risk of severe injury or death. Improperly torqued lug nuts can lead to loss of
wheels. Loss of wheels can cause an accident, severe injury or death.
f Tighten the lug nuts to the proper torque before towing the machine.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Wacker Neuson E3000 and is the answer not in the manual?

Wacker Neuson E3000 Specifications

General IconGeneral
BrandWacker Neuson
ModelE3000
CategoryHeater
LanguageEnglish

Related product manuals