Wacker Neuson E3000 User Manual

Table of Contents
E 3000
wc_bo5000188154_05TOC.fm
9
6.2 Setting up the Burner ....................................................................... 109
6.3 Setting/Checking the Electrodes ...................................................... 112
6.4 Replacing the Burner Nozzle ............................................................ 114
6.5 Setting the “Z” Distance .................................................................... 116
6.6 Adjusting the Air Settings ................................................................. 118
6.7 Adjusting the Fuel Pressure ............................................................. 119
7 Burner Setup—Gas 120
7.1 Factory Settings ............................................................................... 120
7.2 Restrictions for Connecting the Gas Supply ..................................... 121
7.3 Setting up the Burner ....................................................................... 122
7.4 Removing and Installing the Combustion Head ............................... 124
7.5 Adjusting the Ionization Probe and the Electrode ............................ 126
7.6 Changing the Burner Diaphragm ...................................................... 127
7.7 Checking and Adjusting the Air Damper (Gate) Setting ................... 128
7.8 Adjusting the Combustion Head ....................................................... 129
7.9 Checking the Supply Gas Pressure ................................................. 130
7.10 Checking and Adjusting the Burner Gas Pressure ........................... 132
8 Maintenance 134
8.1 Periodic Maintenance Schedule ....................................................... 134
8.2 Inspecting the HTF System and the Fuel System ............................ 135
8.3 Repairing a Hose .............................................................................. 136
8.4 Inspecting the Electrical Components .............................................. 138
8.5 Filling the HTF Reservoir .................................................................. 140
8.6 Cleaning the HTF Strainer ................................................................ 142
8.7 Replacing the Fuel Filter .................................................................. 144
8.8 Lubricating the Hose Reel System ................................................... 145
8.9 Cleaning the Turbulators and the Exhaust Ducting .......................... 146
8.10 Inspecting/Replacing the Rope Gasket ............................................ 148
8.11 Removing the Oil Burner .................................................................. 149
8.12 Installing the Burner ......................................................................... 150
8.13 Storing the Machine ......................................................................... 151
8.14 Storing the Genset ........................................................................... 152
8.15 Preparing the Machine for Seasonal Operation ............................... 153
8.16 Connecting and Maintaining the Battery .......................................... 154
9 Genset Maintenance 155
9.1 Periodic Maintenance Schedule ....................................................... 155

Wacker Neuson E3000 Specifications

General

Electrical Requirements	230 V, 50 Hz
Voltage	230 V
Operating Voltage	230 V
Heat Capacity	3000 W
Fuel Consumption	0.3 l/h
Tank Capacity	12 l
Fuel Tank Capacity	12 l
Heating Capacity	3000 W
Fuel Consumption (l/h)	0.3 l/h
Tank Capacity (l)	12 l
Power Consumption	3 kW