Wayne 4310 - Introduction; Figure 2-1 4300 LCR Meter

Introduction 2–1
2. INTRODUCTION
Figure 2-1 4300 LCR Meter
The 4300 range of LCR Meters provides 4-terminal (Kelvin) measurement of passive
components over a frequency range from 20Hz to 1MHz. There are four models in the range:
Model Minimum frequency Maximum frequency
4310 20Hz 100kHz
4320 20Hz 200kHz
4350 20Hz 500kHz
43100 20Hz 1MHz
For AC measurements, the measurement drive level can be varied from 10mV to 2Vrms, and
DC resistance measurements can also be made. DC bias voltage can be applied during AC
measurements; the preset internal level is 2V or the user can input an external supply of up to
±40V via rear panel connectors.
The instrument’s measurement, display and control facilities include:
• spot frequency measurements
• display of actual measurement values
• bar graph analogue display for easy adjustment of variable components
• bin handler (option)
All the above functions can be selected via manual front panel control and most can be selected
using remote control via the GPIB and RS-232 interfaces for fully-automated high-speed
testing.