Wayne 4310 - Standard Operation Status Commands

REMOTE CONTROL (GPIB & RS-232) 5–12
Command Name Description
*OPT? Option Identification
Query
Returns the hardware options installed in the
instrument.
*OPC Operation Complete
Command
Sets the OPC bit of the ESR register.
*OPC? Operation Complete
Query
Always returns 1 as instrument commands are
always processed sequentially.
*WAI Wait-to-continue Command has no effect as commands are processed
sequentially.
5.2.8 Standard Operation Status Commands
Refer to section 5.2.6 for an explanation of the following commands.
Command Description Query
Read Status
Operation Condition
register.
:STATus:OPERation:CON?
Read Status
Operation
Event register
:STATus:OPERation:EVENt?
:STATus:OPERation:ENABle <NR1>
Set Status Operation
Enable Register
Read Encoded
Message Register
:MESSage?