Wayne 4310 - Lcr Meter Specification; Measurement Parameters; AC Functions; Series or Parallel Equivalent Circuit

4300 LCR Meter Specification 7–1
7. 4300 LCR METER SPECIFICATION
Wayne Kerr Electronics reserves the right to change this specification without notice
7.1 Measurement Parameters
7.1.1 AC Functions
Two parameters can be displayed at the same time as Function 1 and Function 2. Any of the
parameters can be selected and displayed on the instrument using the following letter:
Parameter Letter Parameter Letter
Impedance Z Phase Angle A
Capacitance C Dissipation Factor D
Inductance L Quality Factor Q
AC Resistance R Conductance G
Susceptance B Reactance X
Admittance Y
The following display formats are available:
7.1.2 Series or Parallel Equivalent Circuit
C, D, L, Q, R, G, B, and X – any combination (both as series or both as parallel)
7.1.3 Polar Form
Z + Phase Angle, Y + Phase Angle
7.1.4 DC Function
DC Resistance (Rdc) - Function 1 only
7.2 AC Drive Signal
7.2.1 Frequency Range and Points
Model Frequency Range Number of frequency points
4310 20Hz to 100kHz 557
4320 20Hz to 200kHz 577
4350 20Hz to 500kHz 637
43100 20Hz to 1MHz 737