Appendix 40075165 Markoprint integra PP108
Page 101 of 104 GB
Mac address
The MAC address of the respective Markoprint integra PP108 can be seen on the name
plate of the system. In addition, the Mac address can be seen in the iDesign software.
Instruction
Please see the MAC address by the iDesign software as follows:
Select the menu Functions on the left side of the iDesign software.
If several print systems are connected with the iDesign software, click on the
illustration of the corresponding print system which shall be selected.
Click on the button [System Settings].
Click on the menu slide „System Config“ to call up the corresponding menu.
The MAC address can be seen in the corresponding line.
Fig. 38: iDesign System Config
To Next Page
Loading...
