Weber Markoprint integra PP108 User Manual

Installation and Initial Operation 40075165 Markoprint integra PP108
Page 46 of 104 GB
Connecting to Supply Voltage
Requirements
 Power supply according to "Technical Data" is installed close (max. 1,5 m away)
to the print system.
Instruction
Please connect the print system with supply voltage as follows:
Step
Procedure
1
Connect the power cable with the power supply at the Markoprint integra
PP108.
Fig. 9: Power supply
2
Connect the power cable with the power connector.

Weber Markoprint integra PP108 Specifications

General

Brand	Weber
Model	Markoprint integra PP108
Category	Printer
Language	English