General Information 40075165 Markoprint integra PP108
Page 7 of 104 GB
Cleaning and maintenance
There are no moving parts in the print head requiring regular maintenance.
However, for printing onto outer packaging (e.g. cartons, trays, sacks, etc.) it must be
expected that dust and fibre particles carried along are freed and adhere to the nozzle
plate of the print head. Over a period of time, this can lead to a worsening of the print
quality (see also
Chapter Faults, page 78).
If the dirt proves to be too stubborn and cannot be removed by wiping with a
cleaning pad or rinsing, please return the device to the manufacturer for
professional cleaning. Please note that this constitutes a service which entails
costs, even during the warranty period.
Copyright Protection
This documentation or parts of this documentation may only be copied, photocopied,
reproduced or translated into other languages for personal use. Without previous
expressed written permission of Weber Marking Systems GmbH a reproduction for
circulation to a third party is not permitted.
Purpose and Scope of this service manual
This manual enables safe and effective use of the Markoprint integra PP108.
The Operating manual is a component of the device and must be stored close to the
device to be accessible to the staff at all times. The staff must have read this manual
thoroughly and understand the content before starting any work. Compliance with all
safety notes and instructions given in this manual is a basic prerequisite to safe
operation.
Furthermore, the local accident prevention regulations and general safety provisions for
the area of application of the device are applicable.
Images in this manual serve to provide a basic understanding and may differ from the
actual device version.
In addition to this manual, the instructions in the annexure on the components included
are also applicable.
To Next Page
Loading...
Need help?
General
