Weinig Profimat 23 E - Miscellaneous Safety Instructions

Tech. Dok. / L23 880 02 / 01.00.02 © MICHAEL WEINIG AG
Einleitung
0-10 Profimat 23 E
Safety
Miscellaneous safety instructions
Risk of injury on sharp-edged machine parts in feed and discharge openings, such as
tool cutting edges, anti-kickback fingers and transport rollers. Also risk of being drawn
into the machine when the hood is open and in inching feed mode.
We urgently recommend that the WEINIG service department be called in if repairs are
required.
Dust and chips must be extracted when cleaning the machine.
Only use the clamping devices and saw clamping sleeves supplied. Do not use loose
reducing sleeves to adjust diameters. Always use sharp tools.
Suitable feed tables or roller conveyors must be used to feed and remove workpieces.
The Instruction Manual must be read through completely and understood by all
authorized persons before starting work with the machine. The supervisor concerned
should obtain written confirmation that this is indeed the case.
The Instruction Manual has been read and thoroughly understood.
Date: Signature:
Owner …………………… ………………………………………
Operating
personnel: …………………… ………………………………………
…………………… ………………………………………
…………………… ………………………………………
…………………… ………………………………………