Weinig Profimat 23 E - Master Switch; Control Panel Functions

Tech. Dok. / L23 880 02 / 05.99.01 © MICHAEL WEINIG AG
Operating elements
2-2 Profimat 23 E
Control panel
B1
B2
B3
B4
B5
B6
Emergency OFF
Feed beam up/down
inching mode
Height indicated on pneumatic
control panel or on hood at
timber infeed
Continuous feed
Only with hood closed and
automatic operation
Inching feed
Forward, reverse
Operating hours counter
Hours of operation with feed on
(optional)
Interior lighting on/off
(optional)
Feed rate adjustment
B7
Master switch
Master switch:
"I" Switch on machine: control
panel, control system
(optional) and machine are
operational
"0" Switch off machine
B1