Tech. Dok. / L23 880 02 / 01.00.02 © MICHAEL WEINIG AG
Maintenance and care
9-1Profimat 23 E
General information
Master switch
Switch master switch off and secure with lock
before starting any maintenance work.
Regular maintenance
Maintenance regulations and intervals must be
complied with. WEINIG cannot assume any
liability for damage in cases of non-compliance.
Fire risk, cleaning
Keep highly inflammable wood chips away from
table rollers and all units which may become hot.
Highly inflammable solvents must not be used
for cleaning.
Lubricants, recycling
Only the lubricants listed in the table of
comparable lubricants may be used. They must
subsequently be disposed of in an ecologically safe
manner.
Maintenance symbols
Maintenance interval in operating hours
Drain or change
Check level and top up if necessary
Lubricate with grease gun
Lubricate with oil press/can
Lubricate with a brush
Check/change filter
Adjust
Check
Clean
Change
To Next Page
Loading...