Tech. Dok. / L23 880 02 / 05.99.01 © MICHAEL WEINIG AG
Machine options
6-7Profimat 23 E
Working without sawing unit
The sawing unit must be moved out of the
working area when cutting large timbers:
• Move glazing bead saw upwards by pressing
switches (6) or (7).
• Then move saw blade backwards out of the
working area by pressing switch (10).
Cycled spindles (optional)
All the spindles required for separating the
glazing bead can be operated via an additional
control panel on the control cabinet.
(6) Glazing bead saw, top spindle, right-hand
spindle cycled into or out of the working
position or the working area
(7) Move glazing bead saw in/out
(8) Move top spindle in/out
(9) Move right-hand spindle in/out
To Next Page
Loading...