Tech. Dok. / L23 880 02 / 01.00.02 © MICHAEL WEINIG AG
Einleitung
0-4 Profimat 23 E
Foreword, Symbols
Dear Customer
Your machine may differ from that illustrated here, but that is of no relevance
for safe operation of the machine. A Profimat 23 E with universal spindle has
been used by way of example to describe the operating sequence.
Training
This Manual is merely part of the overall documentation. It is essential to read
and note the manual entitled "Safety Instructions". The "Electrical circuit
diagram", "Pneumatic circuit diagram" and "Hydraulic circuit diagram" are
located in the control cabinet. The "Installation diagram" was sent to you with
the confirmation of your order. Instructions for "Control systems" and
"Supplementary features" supplied separately as required for your particular
machine version.
No one may work with the machine, not even for a brief period, without the
requisite training either within the company, by our field staff, by vocational
training institutes or in the WEINIG Training Center.
Symbols
Danger: This symbol draws attention to exceptional hazards which will
certainly lead to very serious injury if the instructions are disregarded and
precautions are not taken.
Warning: This symbol draws attention to a potential hazard which can lead to
very serious injury if precautions are not taken.
Caution: This symbol draws attention to hazardous situations which may lead
to physical injury, damage to the machine or other property or to loss of data
(control systems).
Additional information on how to operate the machine correctly.
Take note of further instructions, instruction modules, enclosures or other
manufacturers’ instructions.
Reference to general and specific hazards. Some symbols are also
to be found on the machine. These symbols must be noted and must
remain clearly legible at all times.
DANGERDANGER
To Next Page
Loading...