PergoTex II/ PergoTex II LED
Instructions for assembly
We reserve the right to make technical changes
2 safety instructions
Personal injury
Risk of personal injury due to improper installation of the sun protection.
Please read and observe the safety instructions contained in this section.
Product and property damage
Risk of personal injury and material damage due to improper installation of the sun protection.
Please read and observe the safety instructions contained in this section.
2.1 Fundamental safety instructions
• The installation and operating manual must be read and observed.
• Observe the corresponding accident prevention regulations.
• Ensure when installing the awning that all existing electrical connections are disconnected.
• Cordon off a large space around the installation site.
• Check that all scaffolding and building facilities are duly safe and secure.
• Observe the stipulations relating to dowels and fixings.
• Only work with fully intact and appropriate tools.
• Keep plastic sheeting, packaging material and small parts away from children – risk of
suffocation!
• At least two technicians are required for the installation.
2.2 Qualifications
The instructions for assembly are aimed at qualified technicians who have knowledge of and are
experienced in the following areas:
• Safety at work, operating safety and accident prevention regulations
• Use of ladders and scaffolding
• Handling and transporting long, heavy components
• Handling and transporting glass panes
• Handling tools and machines
• Fitting the fixing materials
• Estimation of of building structure
• Start-up and operation of the product.
If one of these qualifications is lacking, a qualified assembly firm must be brought in.
Electrical operations 2.2.1
In accordance with VDE 100 safety regulations, electrical work may only be carried out by an
electrically skilled person. The installation instructions accompanying the supplied electrical
equipment must be observed.
To Next Page
Loading...
Need help?
General
