GENERAL
L3301, L3901, L4701, WSM
G-90
Rear Axle Cover Puller
Code No.
• 07916-51041
Application
• Use to remove a rear axle cover from rear axle.
WSM000001GEG0035US0
Relief Valve Pressure Tester
Code No.
• 07916-50045
Application
• This allows easy measurement of relief set pressure.
WSM000001GEG0027US0
Flow Meter
Code No.
• 07916-52791 (Flow Meter)
• 07916-52651 (Hydraulic Test Hose)
Application
• This allows easy testing of hydraulic system.
WSM000001GEG0036US0
Adaptor Set for Flow Meter
Code No.
• 07916-54031
Application
• Use for test of the hydraulic system.
WSM000001GEG0037US0
Pinion Locking Tool
Code No.
• 07916-55311
Application
• Use to prevent the shaft from turning when you remove or
tighten a staking nut of a bevel pinion shaft.
WSM000001GEG0039US0
(1) Gauge (07916-50322)
(2) Cable (07916-50331)
(3) Threaded Joint (07916-50401)
(4) Threaded Joint (07916-50341)
(5) Adaptor B (M18 × P1.5)
(07916-50361)
(6) Adaptor C (PS3/8) (07916-50371)
(7) Adaptor D (PT1/8) (07916-50381)
(8) Adaptor E (PS3/8) (07916-50392)
(9) Adaptor F (PF1/2) (07916-62601)
(10) Adaptor 58 (PT1/4) (07916-52391)
(1) Flow Meter (2) Hydraulic Test Hose
(1) Adaptor 52
(2) Adaptor 53
(3) Adaptor 54
(4) Adaptor 61
(5) Adaptor 62
(6) Adaptor 63
(7) Adaptor 64
(8) Adaptor 65
(9) Adaptor 66
(10) Adaptor 67
(11) Adaptor 68
(12) Adaptor 69
(13) Hydraulic Adaptor 1
To Next Page
