wsm L3301 - Page 347

TRANSMISSION
L3301, L3901, L4701, WSM
3-S35
Battery Negative Cable Connector
1. Open bonnet.
2. Disconnect battery negative cable connector (1).
9Y1211012RAS0005US0
Front Axle Rocking Restrictor
1. Install the front axle rocking restrictor (1) (refer to "SPECIAL
TOOLS" (see page G-95.)) to the front axle bracket and chock
wheels.
9Y1211012RAS0006US0
Three Point Linkage and ROPS
1. Secure the ROPS (1) with safety strap (2).
2. Remove the stabilizer joint (5), the top link (8), the lift rods (6)
and the lower links (7).
3. Remove ROPS mounting screws (4), and remove the ROPS.
(When reassembling)
9Y1211012TRS0025US0
(1) Battery Negative Cable Connector
(1) Front Axle Rocking Restrictor
Tightening torque
ROPS mounting screw
166.7 to 196.1 N·m
17.0 to 20.0 kgf·m
123 to 144 lbf·ft
ROPS fulcrum screw
118 to 137 N·m
12 to 14 kgf·m
87 to 101 lbf·ft
(1) ROPS
(2) Safety Strap
(3) ROPS Fulcrum Screw
(4) ROPS Mounting Screw
(5) Stabilizer Joint
(6) Lift Rod
(7) Lower Link
(8) Top Link
KiSC issued 09, 2016 A