Xerox 4112 - Loading paper into Tray 8 (Post-Process Inserter)

Setups
9-64 System Administration Guide
Xerox 4112/4127 Copier/Printer
8. Select the state of the fold and staple position of the output paper, and enter the 2-sheet
stack offset amount you measured in Step 6 in Values A & B Before Adjustment.
9. Press Save.
10. Set Booklet Fold State (15 Sheets) in the same way.
Note
The values between 2-sheet stack and 15-sheet stack are adjusted automatically.
Downloaded From ManualsPrinter.com Manuals