Xerox 4595 Copier/Printer System Administration Guide
8-2
8. Setups
NOTE: If you are using the authentication feature, a password
may be required.
KEY POINT:It is recommended that you change the system
administrator UserID and password immediately after installing
the machine. For information about the setting, refer to
System Administrator Settings page 174.
3. Select Confirm.
NOTE: The default UserID value is 11111. When using the
Authentication feature, a password is required. The default
password value is x-admin.
4. From System Administrator Menu, select System Settings.
• User Mode: While still in System Administration mode,
you can still carry out normal operations such as copying
and scanning.
NOTE:To exit a mode entered from User Mode, press the
Log In/Out button, and then from the Log In screen,
select Cancel.
• System Settings: You can set or register the system
settings.
To Next Page
Loading...
Need help?
General