Xerox 4595 Copier/Printer System Administration Guide
8-31
8. Setups
All Services
From this screen, you can select the specific buttons and their
layout as they will appear on the All Services screen when the All
Services button on the control panel is pressed. Refer to the
below illustration.
If you select Not Set, the selected button position remains empty.
NOTE: It is not possible to assign the same feature to more than
one button.
1. From the Screen Defaults window, select All Services
2. Select Change Settings.
The All Services window opens:
NOTE: Select S to display the previous screen and select T
to display the next screen.
To Next Page
Loading...
