Xerox 4595 Copier/Printer System Administration Guide
1-15
1. Overview
Changing the Power Saver Mode time interval
To activate the Power Saver feature, set the Sleep Mode button to
Enabled, and set the Low Power Mode and the Sleep Mode time
intervals as follows:
NOTE: The amount of time that passes before the machine enters
Low Power Mode and Sleep Mode can be specified in 1 minute
increments, from 1 to 240 minutes for each mode.
1. Press the Log In/Out button.
2. Enter the System Administrator ID with the numeric keypad,
and select Confirm
Log In/Out
To Next Page
Loading...
