Xerox 4595 - 2 Configuration; TCP;IP (Lpd;Port 9100); Preparations; Configuration Procedure

Xerox 4595 Copier/Printer System Administration Guide
2-1
2. Configuration
TCP/IP (LPD/Port 9100)
Preparations
The following items are required when using TCP/IP (LPD/Port
9100) protocol on the machine.
• A network environment where TCP/IP can be used.
• The "CentreWare Utilities" CD-ROM, which is included with
this product.
Configuration procedure
Overview
The machine can be connected to computers using TCP/IP (LPD/
Port 9100) protocol.
The following is the procedure to use TCP/IP(LPD/Port 9100)
protocol.
• Configuration on the Machine: Configure TCP/IP (LPD/Port
9100) on the machine.
• Configuration on the Computer: Install the print driver.