Xerox 4595 - Port 9100

Xerox 4595 Copier/Printer System Administration Guide
3-19
3. Using CentreWare Internet Services
Port 9100
This section describes the settings for Port 9100 port.
NOTE: Enable the Port 9100 port when using HP-UX.
1. Start a web browser.
2. Type the IP address or the Internet address for the machine in
the address bar on the browser, and press the Enter key.
• Example of the IP address entry:
http://192.168.1.1/
• Example of the Internet address entry:
http://xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
3. Click the Properties tab.
4. Click + on the left of Protocol Settings to display the items in
the folder.
5. Click Port 9100.
6. Set the Port Number.
7. Select the Enable check box to enable the TBCP Filter.
8. Set the Connection Time-Out.