Xerox 4595 - NTP Time Synchronization

Xerox 4595 Copier/Printer System Administration Guide
8-19
8. Setups
NTP Time Synchronization
You can get the time from a time server (NTP: Network Time
Protocol), to synchronize the machine to the time server time.
1. From the Machine Clock/Timers screen, select NTP Time
Synchronization, and select Change Settings.
2. Select On or Off.
3. If you selected On, use the numeric keypad to enter the IP
address for the time server.
• Off: A connection is not made to the time server.
• On: A connection is made to the time server.
• IP Address: Set the IP address of the time server from
which the time is obtained, using values 0 to 255.
NOTE 1: Addresses 244 to 255.XXX.XXX.XXX and
127.XXX.XXX.XXX cannot be set.
NOTE 2: Select Next to enter the next part of the IP address if
the address between dots is less than 3 digits.
4. Select Save to save the settings and return to the previous
window.