Xerox 4595 - Scan-To-FTP;SMB Defaults

Xerox 4595 Copier/Printer System Administration Guide
8-135
8. Setups
Scan-to-FTP/SMB Defaults
You can select the default protocol that is used for file transfer
from FTP, SMB, and SMB (UNC format).
1. From the Scan Mode Settings screen, select Scan-to-FTP/
SMB Defaults.
2. Select Change Settings.
3. Select the item to be changed.
4. Select Save; you are returned to the Scan-to-FTP/SMB
Defaults screen.
5. Select Close to return to the Scan Mode Settings screen.