Xerox 4595 - Other Settings

Xerox 4595 Copier/Printer System Administration Guide
8-62
8. Setups
Force Watermark - Copy
Job
Select whether or not to force set numbering (watermark) printing
for copy jobs. Select On to force all copy jobs to print with set
numbering (watermark). Select Off if you do not want all copy
jobs printed with set numbering (watermark).
Force Watermark - Client
Print
Select whether or not to force set numbering (watermark) printing
for all jobs that are printed from a client computer. Selections are
Off or On (this forces all jobs sent from a client computer to print a
watermark on the output).
Force Watermark - Mailbox
Print
Select whether or not to force set numbering (watermark) printing
when printing from the mailbox. Select Off or On (this forces all
jobs that are printed from a mailbox to print a watermark on the
output).
Other Settings
This feature allows you to select the default settings for
miscellaneous other options that relate to the machine. Options
here include:
• Auto Job Promotion
• Offset Stacking (Finishing Tray)
• Default Print Paper Size
• Paper Size Settings
• Millimeters/Inches
• Keyboard Input Restriction
• Operation of Up/Down Buttons
• Overwrite Hard Disk (optional accessory)
• Service Representative Restricted Operation (not supported)
• Software Download (currently not supported)
• Document Feeder Tray Elevation
• Estimated Job Time
E
KEY POINT: Each one of these items is discussed starting
page 63.