Xerox 4595 Copier/Printer System Administration Guide
8-177
8. Setups
Maximum Login Attempts
If system administrator ID authentication fails repeatedly, you can
set a limit beyond which further tries are not allowed. Set the
number of authentication attempts allowed between 1-10.
NOTE 1:The count is reset when the machine is restarted.
NOTE 2:To cancel the access rejection, shut down the machine
by switching off the power and switching it on again.
1. Select Maximum Login Attempts.
2. Select On.
3. With S and T, set the number of authentication attempts
allowed.
4. Select Save.
To Next Page
Loading...
Need help?
General