Xerox 4595 Copier/Printer System Administration Guide
8-85
8. Setups
Reduce/Enlarge
Select the default setting for Reduce/Enlarge feature on the
Basic Copying screen. Select one of the following magnification
levels as your default R/E option.
The selection made here appears as the default setting on the
Basic Copying tab (Copy feature); refer to the below illustration:
KEY POINT: If the default value for the Reduce/Enlarge feature
is set to Auto%, then you cannot select the Auto option as the
default setting for Paper Supply (refer to is page 84).
For information about R/E Preset buttons, refer to Reduce/Enlarge
Presets page 114.
To Next Page
Loading...
