Xerox 4595 Copier/Printer System Administration Guide
1-18
1. Overview
• From Last Selection to Sleep Mode: Set the time to
move to the Sleep Mode after the last operation.
NOTE:The default for From Last Selection to Sleep
Mode is 60 minutes. Configure the From Last Selection
to Sleep Mode time to be longer than the From Last
Selection to Low Power Mode time.
9. Press Save.
10.Select Close repeatedly until the System Setting/System
Settings screen is displayed.
11.Select Exit to exit the System Administration mode.
Exiting the Power Saver Mode
The following describes how to exit the Power Saver mode.
The Power Saver mode is exited in the following instances:
• By pressing the Power Saver button
• Receiving Print Data
1. Press the Power Saver button.
Power
Saver
To Next Page
Loading...
