Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
3-6
3. Using CentreWare Internet Services
Ethernet
This section describes the settings for the Ethernet interface.
1. Start a web browser.
2. Type the IP address or the Internet address for the machine in
the address bar on the browser, and press the Enter key.
• Example of the IP address entry: http://192.168.1.1/
• Example of the Internet address entry: http://
xxx.yyyy.zz.vvv/
NOTE: When specifying a port number, add ":" and a port
number to the end of the Internet address.
3. Click the Properties tab.
4. Click + on the left of Port Settings to display the items in the
folder.
5. Click Ethernet.
6. Set the communication speed for the Ethernet interface using
the Ethernet Settings pull-down menu.
7. Save the selection as the machine’s default setting.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE:The default User ID value is 11111 and password is
x-admin.
c. The web browser pages displays a message asking if you
want to reboot the machine.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English