Xerox 4595 Copier/Printer System Administration Guide
8-123
8. Setups
HTTP - SSL/TLS settings 3. Select the item to be set or changed, and select Change
Settings.
4. Select the desired setting or enter the desired numeric value.
5. Press Save.
6. Press Close to return to the Network Settings screen.
HTTP - SSL/TLS
Communication
Specify whether to enable HTTP-SSL/TLS Communication.If
enabled, data encryption between the machine and networked
computers is allowed.
HTTP - SSL/TLS Port
Number
Set the HTTP-SSL/TLS Port Number in the range of 1-65535.
Other Settings
Other Settings allows you to choose the E-mail Receive
Protocol setting. You may choose between SMTP or POP3.
For information about the E-mail Receive Protocol, E-mail page
21.
To Next Page
Loading...
