Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
8-59
8. Setups
3. Follow the instructions provided on the screen for carrying out
a specific function.
Step-by-step instructions are provided for the Initialize Hard
Disk procedure; refer to Initialize Hard Disk page 59.
4. Select Close to return to the Maintenance screen.
5. Select Close to return to the Common Settings screen.
Initialize Hard Disk
This procedure initializes the hard disk. The data erased by
formatting includes additional fonts, ESC/P, HP-GL/2, and SMB
folder.
KEY POINT: The secure print document log is not erased.
1. From the Maintenance screen, select Initialize Hard Disk.
2. Select the partition to be reformatted and select Start.
3. Select Yes.
4. When reformatting completes successfully, the message
screen appears, select Confirm.
5. Select Close to return to the Maintenance screen.
6. Select Close to return to the Common Settings screen.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English