Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
8-27
8. Setups
4. Select the desired setting for the specific Audio Tone feature.
5. Select Save.
Control Panel Select Tone Select the volume level that sounds when a button displayed on
the screen is correctly selected. Select from Loud, Normal, and
Soft. To disable the sound, select Off.
Control Panel Alert Tone Select the volume level that sounds when a non-functioning (or
grayed-out) button is selected or when an error occurs. Select
from Loud, Normal, and Soft. To disable the sound, select Off.
Base Tone For a button that toggles (the setting changes each time it is
pressed), select the volume level that sounds when the button is in
its initial (first) position. This is the sound made when the Interrupt
button is released. Select from Loud, Normal, and Soft. To
disable the sound, select Off.
Machine Ready Tone Set the volume level that sounds when the machine is ready to
copy or print or after the machine powers on. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Copy Job Complete Tone Select the volume level that sounds when the machine
successfully completes the copy cycle. Select from Loud,
Normal, and Soft. To disable the sound, select Off.
Non-Copy Job Complete
Tone
Select the volume level that sounds when the machine completes
a job other than a copy job. Select from Loud, Normal, and Soft.
To disable the sound, select Off.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English