Xerox 4595 Copier/Printer System Administration Guide
8-129
8. Setups
NOTE 2:If the user ID information cannot be acquired, the words
"Unknown User" are printed.
Banner Sheet Select whether or not the banner sheets will be used to separate
different output jobs. Select one of the following:
• Off: Do not print banner sheets.
• Start Sheet: Print a banner sheet before a print job.
• End Sheet: Print a banner sheet after a print job.
• Start Sheet & End sheet: Print a banner sheet both before
and after a print job.
NOTE 1:Even if the stapler feature is enabled, banner sheets are
not stapled.
NOTE 2:On a print job from a Macintosh, the document name
does not appear on the banner sheet.
NOTE 3:When printing banner sheets, they are counted for
metering purposes.
Banner Sheet Tray Select the paper tray from which the banner sheets are
printed. Select one of the following trays: 1, 2, 3, 4, or optional 6
and 7.
PostScript Paper Supply Select whether or not to enable the PostScript DMS (Deferred
Media Selection) feature. Select either Auto or Select Paper
Tray.
PostScript Font Absence Select how the machine will handle a specified PostScript font that
is not loaded on the machine.
• Cancel Printing: This selection cancels the job without printing
it.
• Substitute Font and Print: This selection continues printing
the job and uses a substitute font in place of the missing font.
PostScript Font
Substitution
When a PostScript font specified in a job is not present, select
whether or not to use ATCx for the substitute font.
To Next Page
Loading...
