Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
8-187
8. Setups
Failed Access Log If the number of times that authentication fails within a set time
exceeds the Failed Attempts value set here, then an error is
logged. You can set the failing times within the range from 1 to
600.
1. Select Failed Access Log.
2. Enter the failing times using the numeric keypad.
Store User Details You can set the destination to save authentication information.
Select NVM or hard disk.
NOTE: This item appears when Network Access is selected from
the Login Setup/Auditron Mode screen. For more information,
refer to Login Setup/Auditron Mode page 192.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English