Xerox 4595 System Administration Guide

Xerox 4595 Copier/Printer System Administration Guide
5-5
5. Using the Scan Service
2. Set the e-mail address, host name, and domain name.
a. Select System Settings.
b. Select Network Settings.
c. Select Machine E-mail Address/Host Name.
d. Select E-mail Address and then select Change Settings.
e. Enter the E-mail Address using the keyboard displayed.
f. Select Save.
g. Set the Host Name and Domain Name as above.
h. Select Close.
3. Set the protocol for receiving e-mail.
a. Select Others.
b. Select Mail Receiving Protocol and then select Change
Settings.
c. Select either SMTP or POP3 as appropriate for your
environment.
d. Select Save and then select Close.
If SMTP has been selected
for the Mail Receiving
Protocol
• Select SMTP Server Settings and then set the following
items for the SMTP server.
• SMTP Server - Port Number
Enter a value in the range from 1 to 65535.
If POP3 has been selected
for the Mail Receiving
Protocol
• Select POP3 Server Settings and set then the following
items for the POP3 server.
– POP3 Server - Setup
Select from Specify by the IP Address or Specify by
the Server Name.
– POP3 Server - IP Address
Enter if Specify by the IP Address has been selected
for POP3 Server - Setup.

Xerox 4595 Specifications

General

Brand	Xerox
Model	4595
Category	Copier
Language	English