Scan
Xerox 6204 Wide Format Solution
User Guide
4-113
3. Select [Destination].
4. Select the appropriate mailbox on the [Destination] screen.
5. When the [Scan] screen reappears, set up the necessary [Basic Scan], [Image Quality], and [More
Features] selections.
6. Scan the original(s).
7. When scanning is done, press the <Interrupt> button again.
The interrupt mode will be cancelled, the <Interrupt> button’s indicator lamp will extinguish, and
the suspended print job will resume.
Notes
• If you forget to press the <Interrupt> button to cancel the interrupt mode, the mode will
be canceled automatically after the default [Print Interrupt] timer times out.
• The print interrupt timeout period may be changed from the 60 second default to as
long as 99 minutes. This is accomplished by selecting the [Setup] button on the control
panel, then selecting the [Timers] feature, and finally, [4. Print interrupt]. Use either the
numeric keypad or the scroll buttons to select a different timeout period.