Xerox 6204 Wide Format Solution

System Setup
Xerox 6204 Wide Format Solution
User Guide
6-179
4. Using the numeric keypad or the scroll buttons, enter the desired [Sleep Mode] setting, and then
press [Save].
Notes
• This setting is the amount of time that must elapse since the last user operation, e.g., a
button press or document scan, until the machine enters the [Sleep mode].
• The [Sleep Mode] setting cannot be less than the [Low-Power Mode] setting.
5. Select [Close] on the [Timers] menu to return to the [Setup] menu.
Features
Controls how long the current feature parameters remain in effect after the last key press, scan
completion, or insertion of a document into the scanner. The [Feature] timer can be set between 0 and
99 minutes. A value of 0 means that the feature will never time out. The default value for [3. Features]
is [1 Minute].
Procedure
1. Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.