Xerox 6204 Wide Format Solution

Scan
Xerox 6204 Wide Format Solution
User Guide
4-123
Scan Width
The 6204 Wide Format Solution is, by default, set up to scan standard size originals. If you wish to copy
a non-standard width original, define the width using the [Scan Width] selection. This feature allows
you to define a variable scan width of from 8.2 to 36 inches, in increments of 0.1 inch. The factory
default setting is [Standard Width].
Procedure
1. Select [Scan Width] on the top [1] [More Features] tab.
The [Scan Width] screen will display.
2. When scanning a non-standard width original, select [Variable Width].
The [Scan Width] selection screen will display.