Machine Status
Xerox 6204 Wide Format Solution
User Guide
8-163
Configuration Prints
These selections enable you to obtain printouts that thoroughly describe the machine’s configuration
and settings. Refer to the section on Configuration Prints.
Billing Meters
The Billing Meter information includes the number of linear feet/meters and square feet/square meters
of media printed up to the current time, and also displays the machine serial number. Refer to the
section on Billing Meters.
Show Current Print Job
This selection displays the status of the current print job, or will indicate none if no print job is
processing. Refer to the section on Show Current Print Job.
System Description
The System Description option provides information about the model identity and firmware version for
each component installed on the Xerox 6204 Wide Format Solution with Accxes FreeFlow Print Server.
Refer to the section on System Description.
Recent Faults
This feature lists the fault codes and copy count of the 20 most recent faults. Refer to the section on
Recent Faults.
Printer Status
The Printer Status feature enables you to see if the printer is online or offline, to set the printer to either
an online or an offline state, and to verify the media sizes, types, and thicknesses that are loaded.
Note
Roll 2 is optional. It will appear on the [Printer Status] screen if it is installed and enabled.
Procedure
1. Press the <Machine Status> button.
The [Machine Status] menu will display.
<Machine Status>
To Next Page
Loading...
Need help?
General