Copy
Xerox 6204 Wide Format Solution
User Guide
3-82
Media Source
The Media Source selections enable you to select the media for the copy job. The factory default
setting is [Auto Select].
If you must load different media than that which is currently in the machine, be sure to select the
[Original/Media Size] button on the control panel, and update the media size, type, and thickness
settings.
Procedure
1. Select the media from the [Media Source] selections.
Auto Select
The machine automatically selects the correct roll media based on the original size detected and the
specified reduction and enlargement.
Roll Media (2nd & 3rd buttons)
Select from the roll media size(s) loaded in the tray(s).
Note
Drawer 2 is an option.
Sheet
Enables you to specify the media size series, type, and thickness of the cut sheet media to be printed
from the manual feed tray (bypass).
To Next Page
Need help?
General