Copy
Xerox 6204 Wide Format Solution
User Guide
3-87
Copy Density
The Copy Density option allows you to adjust the lightness or darkness of the copies relative to the
original. The factory default setting is [Normal].
Procedure
1. Adjust the copy density setting using the [arrow up] and [arrow down] buttons.
You can select from nine levels between [Light] and [Dark]. The copy density increases as the level
approaches [Dark], and decreases as the level approaches [Light].
Background Suppression
The Background Suppression feature enables you to make adjustments for documents that exhibit
poor contrast between the foreground image and the background. This feature is particularly useful for
enhancing copy quality when the originals contain cut-and-pastes, uneven density, or dark or colored
backgrounds. The factory default setting is [On].
Notes
• In may be necessary to rotate the image 90 degrees to obtain the correct amount of
background suppression when copying or scanning originals.
• The Background Suppression feature is unavailable when [Original Type] is set to either
[Photo (halftone)] or [Photo (contone)].
To Next Page
Loading...
Need help?
General