Xerox 6204 Wide Format Solution

Copy
Xerox 6204 Wide Format Solution
User Guide
3-62
Stopping Scanning & Copying
Stopping a Scan
Follow the procedure below to stop the scanning of a document.
1. Press the <Stop> button while an original is being scanned or is just exiting the scanner.
Scanning will stop immediately.
Note
If you press the <Stop> button after the document completes its scan and printing begins, the key
press will have no effect. If this happens, refer to Stopping a Copy Job (below) to stop the job.
2. If the original is still in the scanner when scanning stops, a [Document Jam] message will display.
Clear the document jam and remove the document by performing the steps listed on the touch
screen.
<Stop>