Xerox 6204 Wide Format Solution

System Setup
Xerox 6204 Wide Format Solution
User Guide
6-173
Network Settings
You can set up DHCP (Dynamic Host Configuration Protocol), or the static IP address, Subnet Mask,
and Gateway on the [Network Settings] screens. The new settings will take effect immediately.
• If installing in a DHCP environment, complete the steps in "Procedure (DHCP)."
• If setting up a static IP address, complete the steps in "Procedure (Static IP Address)."
Note
The network settings also can be set up using the Web Print Management Tool. Refer to the Web
Print Management Tool online help for more information.
Procedure (DHCP)
1. Select the [Setup] button on the [Menu] screen.
The [Setup] menu will display.
2. Select [Network Settings] on the [Setup] menu.
The [Network Settings] menu will display.