Xerox 6204 Wide Format Solution

Product Overview
Xerox 6204 Wide Format Solution
User Guide
2-36
System Power On Procedure
The procedure below describes the process for powering up the system from a cold start, that is, it
assumes that both the printer and the controller are powered down completely.
1. Move the printer circuit breaker switch up, to the On [
| ] position.
2. Move the printer power switch to the On [
| ] position.
3. Press the power button on the front of the controller.
The power button lamp will illuminate. After about one-half minute, the control panel will display
the message Printer Warming Up. The machine will be print-ready in about three minutes.
Power Switch
Circuit Breaker
Power Button