Before Using the Machine
Xerox 6204 Wide Format Solution
User Guide
1-10
Operational Safety Information
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times.
Do These:
• Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
• This equipment must be connected to a protective grounded circuit, and the equipment is
supplied with a plug that has a protective grounding pin. This plug will only fit into a
grounded electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your
electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use
a plug that lacks a grounded connection terminal to connect the product to an electrical
outlet.
• Always follow all warnings and instructions that are marked on or supplied with the equipment.
• Always exercise care when moving or relocating equipment. Please contact your local Xerox
Service Department, or your local support organization to arrange relocation of the product to a
location outside of your building.
• Always locate the equipment in an area that has adequate ventilation, and has room for servicing.
See the Install Guide for minimum dimensions.
• Always use materials and supplies specifically designed for your Xerox equipment. The use of
unsuitable materials may result in poor performance.
• Always unplug this equipment from the electrical outlet before cleaning.
Do Not Do These:
• Never use a plug that lacks a grounded connection terminal to connect the product to an electrical
outlet.
• Never attempt any maintenance function that is not specifically described in this documentation.
• This equipment should not be placed in a built-in installation unless proper ventilation is provided.
Please contact your Authorized Local Dealer for further information.
• Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
• Never locate the equipment near a radiator or any other heat source.
• Never push objects of any kind into the ventilation openings.
• Never override or "cheat" any of the electrical or mechanical interlock devices.
• Never operate the equipment if you notice unusual noises or odors. Disconnect the power cord
from the electrical outlet and contact your local Xerox Service Representative or Service Provider
immediately.
To Next Page
Loading...
Need help?
General