Xerox 6204 Wide Format Solution

Scan
Xerox 6204 Wide Format Solution
User Guide
4-124
3. Using either the numeric keypad or the scroll buttons, enter the desired scan width, and then
select [Save].
Scan Offset
When the Scan Offset feature is enabled, and a scan offset position is defined, the machine will ignore
image information from the lead edge to the scan offset position. This enables you to eliminate
unnecessary detail from the lead edge of an original. The scan offset position can be set up from 0 to
39.3 inches, in 0.1 inch increments.The factory default setting is [Disabled].
Procedure
1. Select the [Scan Offset] button.
The [Scan Offset] screen will display.